Equipment:
One set of manipulator, one set of tooling platform and one set of conveyor line
Scheme Description:
The embedded inserts are manually placed on the positioning template in the safe area. After the completion, they are sent to the lower part of the manipulator by the tooling. After taking the embedded parts, the manipulator traverses to the mold. After opening the mold, the embedded parts are placed in the mold, and the finished products are taken out and placed on the conveyor belt.
characteristic:
The system is suitable for the inlays embedded in the mold, which can not be integrated or are difficult to be integrated. At the same time, the production volume of finished products fluctuates greatly. It is more suitable when there is no way to mass produce. The cost of using tooling table will be much lower than that of the integrated system.